If you are unsure of the size, please leave your car model and year, and we will match it for you.

This product is the latest crystal-type streamer LED car logo light on the market. Compared with the original car logo and other luminous car logo materials, it has been greatly improved and has a better texture. As for the size of the car logo, due to different measurement units in different regions, there will be deviations when converted into millimeters. The deviation of about three millimeters does not affect the use.

• Product name: LED streamer car logo light
  
• Product material: car logo flame retardant material
  
• Product function: controllable streamer effect
  
• Applicable car series: 90% brand (please note the model when purchasing)
  
• Installation method: replace the original car logo installation

Why choose us?

• 1. Free shipping, fast air transportation, no tariffs.
• 2. 30-day free trial, worry-free return and exchange!
• 3. Support dozens of payment methods such as credit cards and PayPal to ensure the safety of funds!
• 4. Real-time tracking of express information

How to change the car logo?

• Put a towel next to the LOGO (to avoid scratches) and pry off the old car logo with a screwdriver.
• Clean the area (residual glue, double-sided tape or dust, etc.).
  
• Run the power cable through the guide hole at the badge mounting location and into the engine compartment.
  
• Remove the backing from the illuminated badge and stick the badge to the car while pulling the wires and pressing tight.
  
• Connect the power cable from the badge light to the daytime running lights/battery/fuse box/headlight power supply, etc. according to your preference.

ZWWCAR Audi LED Emblem Installation Guide

Plug & Play Installation | No Cutting Required with Compatible Harness

Step 1: Remove the Original Emblem

Open the hood and remove the upper grille cover if necessary.

Carefully release the mounting clips behind the original Audi rings and remove the factory emblem.

Do not force the clips, as this may damage the grille.

Step 2: Install the LED Emblem

Feed the LED emblem cable through the grille opening.

Align the new illuminated Audi rings with the original mounting position and secure them carefully.

Step 3: Route the Wiring

Route the wiring behind the grille toward the engine compartment, following the path shown in the installation video and reference photos.

Keep the wiring away from hot surfaces, cooling fans, and moving components.

Step 4: Connect the Power Supply

Method 1: Plug & Play Installation (Recommended)

For vehicles equipped with a compatible A/C pressure sensor connector:

1. Locate the A/C pressure sensor connector shown in the reference photo.

2. Disconnect the original connector carefully.

3. Connect the supplied ZWWCAR plug-and-play adapter between the original vehicle connector and the sensor.

4. Connect the LED emblem wiring to the adapter.

This method uses a dedicated adapter harness and does not require cutting the factory wiring.

Method 2: DRL Power Connection (Alternative)

If your vehicle does not have a compatible plug-and-play connector:

1. Connect the red and yellow wires together.

2. Connect them to a verified, suitable 12V daytime running light (DRL) positive supply.

3. Connect the black wire to a suitable chassis ground.

4. Insulate and secure all connections properly.

Important: Verify the voltage, polarity, and circuit suitability before making any connections. Do not connect to sensor signal wires. Some vehicles use electronically controlled DRL circuits that are not suitable for directly powering accessories.

Step 5: Test the LED Emblem

1. Check all connectors and wiring.

2. Turn on the vehicle's lighting system.

3. Confirm that the LED emblem illuminates correctly.

4. Secure the wiring and reinstall any removed covers.

Important Notes

• The plug-and-play method is recommended when the supplied adapter is compatible with your vehicle.

• Never force electrical connectors or mounting clips.

• Do not modify or splice factory sensor wiring.

• Installation details may vary by Audi model and year.

• If you have any questions, contact ZWWCAR. We can guide you through the installation step by step.

ZWWCAR – Upgrade Your Drive.